I already have the Warhammer Forge Theodore Bruckner model, a special character from Nuln (with all the iconography of the City of the Griffon Emperors) and I thought it would be freakin' awesome if he was able to fit into this unit, either as a unit filler or as a Preceptor/Grand Master.
The problem is, he comes on a chariot base (50 mm x 100 mm) and the Demigryph bases are 50 mm x 75 mm monster sized, meaning he will not fit in a manner pleasing to my 'Hobby OCD'.
However, Bruckner would fit remarkably well onto the 50 mm x 75 mm base. Unfortunately the GW online store does not sell this particular base size (though it sells most others). A brief email conversation with a 'hobby rep' from GW Australia indicated that there are no immediate plans to release these bases for individual sale. The suggestion was I take a normal 50 mm square base and a cavalry base (50 mm x 25 mm) and glue them together.
Well, OK, better than nothing. If anyone else out there is in the same boat as me, here is how I did it in case you need some ideas. You will probably have a better solution than me too, with more supplies at hand to make it happen (and if so, please let me know how you fared!).
To start with, I lined the two bases up and cut small gaps in the sides. Into these I pressed straightened paper clips to try and keep them lined up and reinforce them, and then filled in as well as I could with superglue and green stuff.
Once that was stable enough, I flipped the base over and green-stuffed the gap between them, trying to make it as smooth as possible. I added some superglue as well to try and give it some more strength.
After that, it was a matter of working it to make sure the base sat flat. The only problem I can see with this solution so far is that the cavalry base is slightly thinner than the monster base, but I reckon this discrepancy will vanish once I get some sand and PVA glue on there.
So yeah, pretty simple, didn't take long and was not very fiddly. It remains to be seen however how it will hold up in battle. Hopefully having the miniature pinned and glued on will help keep it rigid.
Bruckner seems to fit the base size just fine, so bring on the Demigryph's!
|My direwolf, Freyja, 'helping out'.|